Layer 3
=== IP === * [[X.25]] * [[IPv4]] * [[IPv6]] * [[IPsec]] === Routing Protocols === There are three classes . . . distance vector. Link state protocols such as OSPF have complete topology visibility. Instead of . . . a link goes down. * [[RIP]] * [[EIGRP]] * [[OSPF]] * [[BGP]] * [[Route Redistribution]] * [[Policy-Based . . .
2K - last updated 2016-12-05 12:37 UTC by 1451
OSPF
Open Shortest Path First (OSPF) protocol is a link state routing protocol. OSPF will re-send routes every . . . 30 minutes. OSPF routers have complete visibility. They know the . . . the routes for inclusion into the routing table. OSPF uses IP protocol 89 and multicast address 224.0.0.5 . . . on broadcast type network. OSPF has a hierarchical design by utilizing areas with . . . is possible, then virtual links must be used. An OSPF router can be in multiple areas. Such router is . . .
10K - last updated 2016-11-24 23:48 UTC by 1451
Quagga BGP routing
This is how to setup bgp routing on Solaris 10 with quagga. For more information see http://www.quagga.net/ . . . 2602/tcp # RIPd vty ripngd 2603/tcp # RIPngd vty ospfd 2604/tcp # OSPFd vty bgpd 2605/tcp # BGPd vty . . . ospf6d 2606/tcp # OSPF6d vty ospfapi 2607/tcp # ospfapi . . .
4K - last updated 2009-02-10 15:31 UTC by arkadi
Route Redistribution
When a router compares two identical prefixes, first it looks at the administrative distance. If it is . . . || ||Internal EIGRP ||90 || ||IGRP ||100 || ||OSPF ||110 || ||IS-IS ||115 || ||RIP ||120 || ||EIGRP . . . ip address> <wildcard> [access-list-number] * OSPF distance ospf <external> <intra> <inter> distance . . . ospf <value> <src router-id> <wildcard> [access-list-number] . . . OSPF does not allow to overwrite its rule for intra-inter-external . . .
4K - last updated 2016-11-27 23:11 UTC by 1451
4 pages found.